Four wires of equal length are bent in the form of four loops $P, Q, R$ and $S.$ These are suspended in a uniform magnetic field and the same current is passed through them. The maximum torque will act on:

$A$ current-carrying loop is placed in a uniform magnetic field in four different orientations,$I$,$II$,$III$,and $IV$. Arrange them in the decreasing order of potential energy.

$A$ circular coil having $200$ turns,$2.5 \times 10^{-4} \text{ m}^2$ area and carrying $100 \mu\text{A}$ current is placed in a uniform magnetic field of $1 \text{ T}$. Initially,the magnetic dipole moment $(\vec{M})$ was directed along $\vec{B}$. The amount of work required to rotate the coil through $90^{\circ}$ from its initial orientation such that $\vec{M}$ becomes perpendicular to $\vec{B}$ is . . . . $\mu\text{J}$.

$A$ small coil $C$ with $N = 200$ turns is mounted on one end of a balance beam and introduced between the poles of an electromagnet as shown in the figure. The cross-sectional area of the coil is $A = 1.0 \, cm^2$,and the length of the arm $OA$ of the balance beam is $l = 30 \, cm$. When there is no current in the coil,the balance is in equilibrium. On passing a current $I = 22 \, mA$ through the coil,the equilibrium is restored by putting an additional counterweight of mass $\Delta m = 60 \, mg$ on the balance pan. Find the magnetic induction $B$ at the spot where the coil is located. (in $, T$)

$A$ circular coil of radius $2 \text{ cm}$ and $125 \text{ turns}$ carries a current of $1 \text{ A}$. The coil is placed in a uniform magnetic field of magnitude $0.4 \text{ T}$. The axis of the coil makes an angle of $30^{\circ}$ with the direction of the magnetic field. The torque acting on the coil is $\alpha \times 10^{-4} \text{ N.m}$. The value of $\alpha$ is . . . . . . .

$A$ conducting ring of mass $2 \ kg$ and radius $0.5 \ m$ is placed on a smooth horizontal plane. The ring carries a current $i = 4 \ A$. $A$ horizontal magnetic field $B = 10 \ T$ is switched on at time $t = 0$ as shown in the figure. The initial angular acceleration of the ring will be: